Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Find out what route a CDP takes when dialed 1

Status
Not open for further replies.

TPhoneD

MIS
Dec 9, 2002
123
US
Could someone tell me how to list the route a CDP is taking? I have tried to print the CDP but does not give me the information I am needing. I need to see what route the call is going over when the CDP is dialed.

Thanks for your help.
 
CDP has the RLI attached to it. For example, CDP is going out on RLI 6.

REQ PRT
CUST 0
FEAT RLB
RLI 6

RLI 6
ENTR 0
LTER NO
ROUT 3
TOD 0 ON 1 ON 2 ON 3 ON
4 ON 5 ON 6 ON 7 ON
CNV NO
EXP NO
FRL 0
DMI 0
FCI 0
FSNI 0
OHQ NO
CBQ NO

ISET 0
MFRL 0


UDATA: 200429 5 PDATA: 215052 151
DISK RECS AVAIL: 512

REQ

The RLI goes out Route 3
 
Thanks for the info - but not exactly what I am looking for. I printed the DN came back and told me:

DN 339
TYPE CDP
STCD DSC

What I am trying to find out what route this call would take when someone dialed 339xxxx.

Thanks again!

 
dail the # from a phone near the maintenance terminal and trac it in ld 80.You will see what trunk TN it originated on.

LD 80
.TRAC 0 XXXX(DN OF PHONE)
ENTER WHEN CALL IS IN PROGRESS.
 
ld 87
prt cdp
type = dsc
than you number. this will give you the rli than do as Mcgruff suggested

Or just use ld 80
call a number from your phone than in ld 80 trak TN(enter your tn)
 
Thanks everyone - this was perfect- most helpful!!!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top