Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Find Me/Follow Me 1

Status
Not open for further replies.

exsmogger

Vendor
Oct 23, 2002
5,243
US
I have SIP trunks on my office BCM50 R6 and finally got the find me/follow me feature to work. Be sure to allow access to BlocA (IP trunks) or BlocB (PRI channels) for the virtual terminal DN's. Also, I have a customer who was trying to get FMFM to work on a BCM50 with a PRI. It turned out his problem was not having an outgoing number programmed in the OLI field for the virtual terminals. He learned that the PRI provider was rejecting all anonymous calls when he tried to hand-off calls using F960. As soon as he filled in the public OLI field for all the virtual terminal DN's the FMFM feature worked fine.

Brian Cox
Georgia Telephone
 
Thanks ex

I did a FAQ while back Let me know if anything else to change besides OLI bit.

Cheers




________________________________________

Add me to LinkedIN

**New Allworx Forum**

small-logo-sig.png

=----(((((((((()----=
Toronto, CAN
 
Another thing that might be an issue. The virtual terminals are assigned 3 intercoms, so I assume that means they can handle 3 simultaneous calls. But if you have 5 destinations programmed you would need a minimum of 2 FMFM licenses in order to get 2 virtual terminals that could handle 6 simultaneous calls (the incoming call and 5 destinations). What's your thoughts?

Thanks for updating the FAQ.

Brian Cox
Georgia Telephone
 
I think 3 intercoms is just some resource thing.

In my testing it boils down to 1 Virtual Terminal (Application DN) per phone number called.
Example
1 FMFM license
5 Max Sessions
5 Application DN's
User has all 5 external destination slots programmed.

All 5 Application DN's will be in use when users DN is called.


________________________________________

Add me to LinkedIN

**New Allworx Forum**

small-logo-sig.png

=----(((((((((()----=
Toronto, CAN
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top