file mount , disk problem

[scient]

hai all,

I have a problem here with one filesystem which spam acroos 5 disks is not mounted after We recycle that server , 4 disk are EMC’s and hdisk5 which is SHARK disk which are coming (bypass ) from vio server to server1

Server1/root: / > lsvg -l viovg
viovg:
LV NAME TYPE Ps PPs PVs LV STATE MOUNT POINT
fslv01 jfs2 87 87 2 open/syncd /db2
fslv02 jfs2 1912 1912 5 closed/syncd /db2pd->prob
fslv03 jfs2 4 4 1 open/syncd /tws

Server1/root: / > lsvg -p viovg
viovg:
PV_NAME PV STATE TOTAL PPs FREE PPs FREE DISTRIBUTION
hdisk1 active 575 0 00..00..00..00..00
hdisk2 active 575 0 00..00..00..00..00
hdisk3 active 431 0 00..00..00..00..00
hdisk4 active 431 0 00..00..00..00..00
hdisk5 missing 203 20 00..00..00..00..20-->problem

Server1/root: / > lslv -l fslv02
fslv02:/db2pd
PV COPIES IN BAND DISTRIBUTION
hdisk1 495:000:000 7% 115:035:115:115:115
hdisk2 431:000:000 19% 087:086:086:086:086
hHdisk3 431:000:000 19% 087:086:086:086:086
hdisk4 372:000:000 0% 111:000:039:107:115
hdisk5 183:000:000 22% 041:041:040:040:021


how to fix this one ?????

thank you,

 

[p5wizard]

Well, without that hdisk5, you won't be able to mount the FS.

How did you recycle the LPAR? If you needed to reactivate the LPAR, chances are there's some missing configuration in the LPAR's profile, or you chose a profile which doesn't have the last VSCSI adapter defined for the LPAR, or you added the VSCSI adapter dynamically last time and forgot to configure that VSCSI adapter in the profile, or misconfigured the VSCSI adapter in the profile, or ...

Take a look in the VIOS' configuration and the LPAR's configuration on the HMC and maybe you can figure out what is missing or misconfigured.


HTH,

p5wizard