FIji cards

[blue31]

I have a opt 61 that has 4 fiji cards, Fiji 0-0,Fiji 0-1 and Fiji 1-0 and 1-1.can some tell me what loops are controlled by which Fiji card

 

[KCFLHRC]

Fiji 0 is loops 0-15
Fiji 1 is loops 16-31
Fiji 2 is loops 32 -47
Fiji 3 is loops 48 - 63

 

[bhassell2000]

Isn't a 61 one network group? 0-15 and 16-31?

Thanks,

Buddy

Linked in Profile

http://www.linkedin.com/in/buddyhassell

 

[KCFLHRC]

Yep, sounds like you have an 81

 

[telebub]

Yep, 61 doesn't have FIJI or IGS cards.

 

[blue31]

Thanks for your help.
I look at the cabling documents and understand how they come up ring 0 and ring 1 and how they are cabled,what I dont get is how the rings comnuicate with each other.

 

[blue31]

I have now have a problem at my site.
I have 4 FIJI cards in the system.
And I am getting FIJI006 errors.
Here is a print out.

FIJI006

FIJI006

OVL000
>ld 135
CCED000
.stat cpu
cp 1 15 PASS NORMAL ENBL

cp simm/bank stat
1 0/0 ENBL
1 0/1 ENBL
1 1/0 ENBL
1 1/1 ENBL
1 2/0 ENBL
1 2/1 ENBL


cp 0 15 PASS NORMAL STDBY

cp simm/bank stat
0 0/0 ENBL
0 0/1 ENBL
0 1/0 ENBL
0 1/1 ENBL
0 2/0 ENBL
0 2/1 ENBL
.&****
>ld 60
DTI000
.ssck 1
ENBL
CLOCK ACTIVE
GROUP 1
SIDE 1
CLOCK CONTROLLER - LOCKED TO LOOP 2
PREF - 2
SREF - 10
AUTO SWREF CLK - ENBL
NO ERROR
.****
OVL000
>ld 39
ISR000
.st
FIJI006
at fiji 0 0
ENBL
JUNCTORS STATE : 000 BUSY
.stat fiji 0 1
ENBL
JUNCTORS STATE : 000 BUSY
.stat fiji 1 0
OPERATIONAL - SONET DSBL

.stat fiji 1 1
OPERATIONAL - SONET DSBL

.stat ring 0
RING STATE: SURVIVAL STATE
RING AUTO RECOVERY IS ON
FIJI 0 0 ENBL
FIJI 1 0 OPERATIONAL - SONET DSBL
FIJI 2 0 UNEQ
FIJI 3 0 UNEQ
FIJI 4 0 UNEQ
FIJI 5 0 UNEQ
FIJI 6 0 UNEQ
FIJI 7 0 UNEQ

.stat ring 1
FIJI006

RING STATE: SURVIVAL STATE
RING AUTO RECOVERY IS ON
FIJI 0 1 ENBL
FIJI 1 1 OPERATIONAL - SONET DSBL
FIJI 2 1 UNEQ
FIJI 3 1 UNEQ
FIJI 4 1 UNEQ
FIJI 5 1 UNEQ
FIJI 6 1 UNEQ
FIJI 7 1 UNEQ

What corrective action can I do.

.

 

[rumelihavasi]

have you checked the cabling?
What is the release?
what is the CPU machine Type?

 

[blue31]

I have check the cabling all is secured.
The rls 4

 

[blue31]

I am getting FIJI006 errors.here is a print out
What corrective action should I take.
have now have a problem at my site.
I have 4 FIJI cards in the system.
And I am getting FIJI006 errors.
Here is a print out.

FIJI006

FIJI006

OVL000
>ld 135
CCED000
.stat cpu
cp 1 15 PASS NORMAL ENBL

cp simm/bank stat
1 0/0 ENBL
1 0/1 ENBL
1 1/0 ENBL
1 1/1 ENBL
1 2/0 ENBL
1 2/1 ENBL


cp 0 15 PASS NORMAL STDBY

cp simm/bank stat
0 0/0 ENBL
0 0/1 ENBL
0 1/0 ENBL
0 1/1 ENBL
0 2/0 ENBL
0 2/1 ENBL
.&****
>ld 60
DTI000
.ssck 1
ENBL
CLOCK ACTIVE
GROUP 1
SIDE 1
CLOCK CONTROLLER - LOCKED TO LOOP 2
PREF - 2
SREF - 10
AUTO SWREF CLK - ENBL
NO ERROR
.****
OVL000
>ld 39
ISR000
.st
FIJI006
at fiji 0 0
ENBL
JUNCTORS STATE : 000 BUSY
.stat fiji 0 1
ENBL
JUNCTORS STATE : 000 BUSY
.stat fiji 1 0
OPERATIONAL - SONET DSBL

.stat fiji 1 1
OPERATIONAL - SONET DSBL

.stat ring 0
RING STATE: SURVIVAL STATE
RING AUTO RECOVERY IS ON
FIJI 0 0 ENBL
FIJI 1 0 OPERATIONAL - SONET DSBL
FIJI 2 0 UNEQ
FIJI 3 0 UNEQ
FIJI 4 0 UNEQ
FIJI 5 0 UNEQ
FIJI 6 0 UNEQ
FIJI 7 0 UNEQ

.stat ring 1
FIJI006

RING STATE: SURVIVAL STATE
RING AUTO RECOVERY IS ON
FIJI 0 1 ENBL
FIJI 1 1 OPERATIONAL - SONET DSBL
FIJI 2 1 UNEQ
FIJI 3 1 UNEQ
FIJI 4 1 UNEQ
FIJI 5 1 UNEQ
FIJI 6 1 UNEQ
FIJI 7 1 UNEQ

What corrective action can I do.

 

[janaya]

I don't know off the top of my head, but in the Messages NTP, it will tell you what to do with this FIJI error. It will even tell you if you do from CLI..

.err fiji006

but you may need to reset the ring.