Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

FIJI card firmware

Status
Not open for further replies.

roymas

Technical User
Feb 25, 2009
7
US

only one fiji card's firmware is different.
all of fiji cards are two-slot fiji card but
except fiji 1 1 have a one-slot fiji card's firmware.

CS1K 6.0 Multi-Group


.stat fiji 0 0 full
ENBL

CARDID : NTRB330506NNTMENC35T3W FPGA2122
BANK 0 FW VERSION: 016
BANK 1 FW VERSION: 029
BANK 1 IS ACTIVE
STATE : ENABLED
SONET STATE : ENABLED
JUNCTORS STATE : 000 BUSY
.

ISR000
.stat fiji 0 1 full
ENBL

CARDID : NTRB330506NNTMENC35T8F FPGA2122
BANK 0 FW VERSION: 016
BANK 1 FW VERSION: 029
BANK 1 IS ACTIVE
STATE : ENABLED
SONET STATE : ENABLED

.stat fiji 1 0 full
ENBL

CARDID : NTRB330506NNTMENC356B3 FPGA2122
BANK 0 FW VERSION: 016
BANK 1 FW VERSION: 029
BANK 1 IS ACTIVE
STATE : ENABLED
SONET STATE : ENABLED
JUNCTORS STATE : 000 BUSY

.stat fiji 1 1 full
ENBL
CARDID : NTRB33AD11NNTMENC5EBJ2 FPGA2122
BANK 0 FW VERSION: 019
BANK 1 FW VERSION: 021
BANK 1 IS ACTIVE
STATE : ENABLED
SONET STATE : ENABLED
 
ok...

bank 0 is a factory software
bank 1 is a software was run

msn: ngensysatlc@hotmail.com
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top