Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
fiber extender noise
- Thread starter lvNortel
- Start date
- Thread starter
- #2
Follow up.
It is connected to a MICS 7.0 0x16 with other modules using fiber extenders.
Every few days the user picks up the handset places a call the party hears a garbled sound. When I reset the extender it goes away for a few more days. I just replace both REMOTE and LOCAL extenders to see when happens. Just wanted to be ready with other solutions in case that does not fix it. I am wonder if the fiber cables could be compromised or can they be effected by dust or dirt on the ends?
"A phone is a phone and not a computer workstation".
It is connected to a MICS 7.0 0x16 with other modules using fiber extenders.
Every few days the user picks up the handset places a call the party hears a garbled sound. When I reset the extender it goes away for a few more days. I just replace both REMOTE and LOCAL extenders to see when happens. Just wanted to be ready with other solutions in case that does not fix it. I am wonder if the fiber cables could be compromised or can they be effected by dust or dirt on the ends?
"A phone is a phone and not a computer workstation".
curlycord
Programmer
Dust could be a hindrance maybe but doubt for this issue.
Using existing ones on site try swapping just remote or local in future so you will know which end is the issue.
Guessing bad resistors or caps on one of them and/or heating up.
=----(((((((((()----=
curlycord
Toronto Canada
Using existing ones on site try swapping just remote or local in future so you will know which end is the issue.
Guessing bad resistors or caps on one of them and/or heating up.
=----(((((((((()----=
curlycord
Toronto Canada
curlycord
Programmer
Maybe post what model and make Extendars you are using and if any UPS on them.
MCK Extendars have a log you might be able to look at.
=----(((((((((()----=
curlycord
Toronto Canada
MCK Extendars have a log you might be able to look at.
=----(((((((((()----=
curlycord
Toronto Canada
- Status
Similar threads
- Locked
- Question