Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
FEM on BCM 1000 1
- Thread starter RYLSFAN
- Start date
-
1
- Thread starter
- #2
the answer is no
The FEM allows you to connect a maximum of six Norstar expansion modules to a BCM1000.
Each expansion module connection requires one DS30 bus, therefore, the BCM1000 used for this
purpose can only support one FEM module (and no BCM1000e) if you are converting a
fully-configured Norstar system.
Thats not my fastball, thats my hurry up and get by you pitch... Satchel Paige
The FEM allows you to connect a maximum of six Norstar expansion modules to a BCM1000.
Each expansion module connection requires one DS30 bus, therefore, the BCM1000 used for this
purpose can only support one FEM module (and no BCM1000e) if you are converting a
fully-configured Norstar system.
Thats not my fastball, thats my hurry up and get by you pitch... Satchel Paige
- Status
Similar threads
- Question