Anyone know of any issues using the FEM and DID cards? I can hook to the Dmark with my Butt Set and dial the Rec digits and it works perfect. But if I dial in through Telco the call rings the correct phone but when you answer it the call drops. There is an Avaya system there so we tested the DID circuits on it and had no problems. So now I'm lost.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
FEM Mod on BCM 400
- Thread starter hawks
- Start date
- Thread starter
- #3
- Thread starter
- #4
Ok got back to site and moved the DID lines back to the BCM for testing. Same thing answer the call and it would drop. I flipped the pair at the D-Mark (don't know why it was just one of the things that I did not try earlier) and bang everything worked. So it looks like the polarity is different between the Avaya DID card and the Nortel. All is right in the world now..
- Status
Similar threads
- Locked
- Question
