Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

feedback when paging

Status
Not open for further replies.

atdjr123

Technical User
Mar 12, 2012
559
US
is there anyway to adjust the page volume other than initializing a page and toggling down the volume bar on each extension?? i've removed sets that are close to one another out of the paging zone and that works somewhat but i also have a cordless t7306e that causes a lot of feedback when it pages... any solutions???

 
There are page units that put a delay in so you wont get feedback.
 
this is the internal page system on the MICS w/ 7.1 software. just figured maybe there was something i was missing in programming or maybe a backdoor access that would allow me to adjust the parameters.
 
If internal only (through sets) then it's odd to get that much feedback.
How close are the sets?
For those too close take the odd one out of the page zone, they can hear the page from other sets.
If the T7406e pages fine from the parking lot then you know you are paging to close to a set.





=----(((((((((()----=
curlycord
 
just turning the volume down on the sets appears to be the only solution. have already staggered sets that are close to one another. it's always been a flaw w/ these sets especially when especially when pressing the page button w/ the handset in the cradle. it is what it is!!!!!

Voice Connect Plus, Inc.
 
thanks, i appreciate the info however, my problem is with the mic sensitivity and feeback occurs when mics are to close to speaker or volume to high etc. i have changed handset volume from system to user and adjusted noise and volume levels on cordless. seems to work for now. thanks


Voice Connect Plus, Inc.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top