Feature Key Reprogramming Question

[jag1046]

I have one phone that has 2 intercom buttons and no Park.
How do I change one of them to park? All the other phones only have one intercom button.


Thanks

Bill

<<<<< Hi I'm a telephone technician running a test on your telephone lines. To complete the test please dial nine (9), zero (0), pound sign (#) and hang up. >>>>>

 

[bkrike]

To make a phone have only one intercom you have to go into system programming / T&S. You cannot change an intercom by just programming the phone through feat*3. To make any other button call park- you program the button as a feature, then feat74.

 

[jag1046]

Can you be a little more specific please, I'm new to this system.

Bill

<<<<< Hi I'm a telephone technician running a test on your telephone lines. To complete the test please dial nine (9), zero (0), pound sign (#) and hang up. >>>>>

 

[bkrike]

Sure- to program a feature key:
press feat*3
press the button you wish to program
press feature 74
Done.

To change the number of intercoms you should your vendor.

 

[jag1046]

Excuse my ignorance but are you telling me I can't change one of his intercom buttons to a park button?


Bill

<<<<< Hi I'm a telephone technician running a test on your telephone lines. To complete the test please dial nine (9), zero (0), pound sign (#) and hang up. >>>>>

 

[bkrike]

As I stated earlier, to change the number of intercoms on a phone you need to go into system programming, which is why I recommended vendor support. The answer is no, you cannot change an intercom button by trying to program it via feat*3.

 

[jag1046]

Rats!

<<<<< Hi I'm a telephone technician running a test on your telephone lines. To complete the test please dial nine (9), zero (0), pound sign (#) and hang up. >>>>>

 

[acewarlock]

If you know how to copy a phone, then just copy from 1 of the phones that has only 1 intercom key to the 1 that has 2 .

 

[jag1046]

ok next question. How do I copy a set? Will the destination keep it's extension or will I have to change it back after the copy.

Bill


<<<<< Hi I'm a telephone technician running a test on your telephone lines. To complete the test please dial nine (9), zero (0), pound sign (#) and hang up. >>>>>

 

[senk1s]

do you happen to have the installer guide corresponding to the software release of your system?

the admin interface varies with version.

 

[1weasel]

You should check out thread 799-941866 and then consider calling a vendor.
1weasel