Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Feature Failed trying to log into 69XX phones.

Status
Not open for further replies.

JCCDM

Technical User
May 24, 2016
210
AU
Hi Guys,

Having an issue with a new site that we have relocated to.

Users are programmed on a controller that has been disconnected for the time being (ver 7.2) but are all resilient to another system in the cluster (ver 8.0 SP3 PR2).

the new site is using 6930 handsets as well as some old 5320e handset that have come across from the old building.

When I try and log users on from the old controller into the new handsets, I am getting Error: Feature Failed. when I log them onto the 5320e at the new site it works fine.

Is this because their local controller is at the latest version and doesn't support 69XX phones? I was under the impression that if they were resilient to an updated controller and currently failed over to that controller, there would be no issue.

I have also checked the logs for the failed attempts and can see the following 2 logs. (logs taken from the resilient controller as the other controller is currently switched off)

Hot Desk : 4621 logged out from *8*4137 by system during registration
Hot Desk : Login failed at *8*4137 - Redirect or update issue

happy to be proven wrong if this is not possible but just after some guidance.

The original controller will be updated and converted to virtual in the near future but has been put on hold due to unrelated license purchasing issues. Just after some answers for the customer in the meantime.

Cheers,
JCCDM
 
At the point were you login a user at a phone that phone will register itself at that node.
In your case a 69xx phone is trying to connect to a 7.2 version system. that will not work. Move these users over to the 8.0 system.
 
Our license issue was sorted within a couple of days and the system was upgraded to version 9 and all issues were sorted. Thanks for your time.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top