Feature Codes 1

[bgosserand]

Is there a way to print out what the feature codes are. I have version R6 of the Ericsson Software VERSION: ASB50104-R6-BC90C/CNI75
The issue i'm having is that the documentation I have apparently doesn't match what the switch is programmed at. For example I want to forward on no answer. I dial *211# and I get Vacant Number and Divert on busy *212# and get vacant number.
*22# is supposed to be external call forward, but it's actually *23# on my system

 

[Isinor]

Hi bg...

You would have thought that NADAP:NUMTYP=FC; would do the trick, but you can not print them from the MD110. The codes are detailed in Alex or Dynatext and are country specific. If you have access to Alex look in… Applications Systems, Country then in General, Description.

Example for BC10 UK…

Suffix
Some facilities can be initiated by a digit, (= suffix). These digits are not depending on any other number types.
The following suffixes exist.
2 Refer back
3 Conference
4 Intrusion
5 Call waiting indication
6 Call back
7 Paging
8 Common parking / Individual call pick-up
9 Post dialling

Suffix unique for ISDN-terminals
Some facilities can be initiated by a suffix procedure.
The following suffix procedures exist.
*0# Hold
*2# Refer back (Retrieve)
*3# Conference
*4# Transfer
*9# Post dialling (ETE DTMF)
*39# Malicious call tracing
*1234# UUI, User-User Information

Service codes
Some facilities can be programmed, ordered and cancelled by a procedure containing a service code and with a syntax according to CEPT (e.g. * 21 * nnnn #). See directions for use where the procedures are shown.

The following service codes exist.
001 General cancellation
08 Choice of language
10 Ordering or cancellation of RID Service (personal number)
2 Direct diversion, follow me
211 Diversion on no reply
212 Diversion on busy
218 Follow me to paging
22 External follow me
23 Ordering or cancellation of interception message from primary extension
230 Ordering or cancellation of interception message from secondary extension, follow me answering position and PABX operator
24 Diversion of PBX group
241 Open/Close ANCD network
25 Group do not disturb
26 Print out interception message
27 Individual do not disturb
31 Manual message waiting
36 Service 3 for User to User signalling (ISDN)
37 Automatic call back, cancellation
39 Malicious call tracing
41 Data privacy
44 Call to individual external line with possibility to intrude (DTS)
51 Individual abbreviated number, programming
52 Initiate account code as IAD number
53 Initiate authority code as IAD number
54 Initiate regional authority code as IAD number
60 By-pass of diversion
61 Account code predialling
72 Authority code predialling
73 Lock/Unlock central authority code
74 Change regional authority code
75 Dial with regional authority code
76 Lock/Unlock regional authority code
77 Customer Identity Storage
8 Answer on group call pick-up, answer on common bell group and answer on night time connection
81 Paging towards directory number
810 Paging alarm towards directory number
82 Answering paging
820 Acknowledge of paging alarm
84 Ordering of night time connection
91 Cancel of message waiting
*** Repetition of the last external number dialled

 

[mdfan]

Please keep in mind that in order to use diversion on busy/no answer that an individual divertee position must have been assigned for the extension in addition to setting the D4D5 correctly in CDIV parameter.

 

[mdfan]

One more thing , if ASPAPARNUM=98 and ASPAPARNUM=105 are both equal to 1 then diversion on busy/no answer is automatically initiated.
If this is not wanted pls set the ASPAC:s to 0.
Then you can activate it by using the FC code you referred to in the beginning.