FC4700 reinitialization

[BizonGod]

Hello!
I have some FC4700. Drives was mixed at delivery.
I started with null-modem, and i can get to
<SP_IP>/start.htm with domain error and to
<SP_IP>/setup with no PSM LUN found, so i
managed to create RAID5 PSM LUN on disk 0 to 4.
On bottom of page was info that after binding there
will be redirection to setup page, but after an hour
still nothing (73GB HDD). Is it correct? How long
may take it?
And how about flare? Is it on HDD in SP and will be
copied to FC HDD?

BTW. Where to get Navisphere CLI for Win?

Thanks
Karol

 

[BizonGod]

After some hours with FC4700 i created (i think) PSM and
configured security, so i can get to Navisphere Manager.
After few thinks i did (create LUN etc) i found i have to
commit Base soft, and here is my next problem.
Shortly after clicking Commit i'm getting error as shown in
attachment. Similar problem is in thread511-1442574 .
What shall i do?
Now i have one Power supply disconnected, disks in DPE are
73G/10K, FC front end unconnected.

Basic conf:

Name of the software package: Base
Revision of the software package: 08_50_55
Commit Required: YES
Revert Possible: NO
Active State: YES
Is installation completed: YES
Is this System Software: NO

Name of the software package: ManagementServer
Revision of the software package: 6.5.0.3.10
Commit Required: NO
Revert Possible: YES
Active State: YES
Is installation completed: YES
Is this System Software: NO

 

[mrdenny]

You can get NaviCLI from PowerLink.emc.com.

Denny
MVP
MCSA (2003) / MCDBA (SQL 2000)
MCTS (SQL 2005 / SQL 2005 BI / SQL 2008 DBA / SQL 2008 DBD / SQL 2008 BI / MWSS 3.0: Configuration / MOSS 2007: Configuration)
MCITP (SQL 2005 DBA / SQL 2008 DBA / SQL 2005 DBD / SQL 2008 DBD / SQL 2005 BI / SQL 2008 BI)

My Blog