FC3 Install Issue

[axman505]

Hello,

I just assembled a 64bit system with the Asus A7V Deluxe mainboard. I am trying to use the promise onboard ata/133 raid controller to mirror 2 250gb harddrives. I created the mirrored raid setup from the bios, and then went to install FC3. The install loads, it detects the following devices:

RTL 3129, SMC EZ Card Fast Ethernet
SysKonnect SX-98xx Gigabit
VIA Sata Controllers
Promise Sata Controllers

Do i need to load an additonal device for the ata/133 raid setup to detect?

Thanks, i have tried a few differen things, everything unsuccessful

 

[marsd]

SATA from any board manufacturer is still bleeding edge.
Check out promises site,downloads and support, otherwise you'll probably never get it working.