FBUG on CPPM

[bdabson]

Hi,

can anyone help me find out the FBUG password on the CPPM NTDW61 card.
in the older SSC cards there wasn't a password.

If nyone can point me to a doc or link that would be great.

I need to get the production test results to verify if the card is good for a customer.

cheers

 

[Firebird Scrambler]

I wasn't aware that there was an FBUG for anything else other than the SSC processor?.

I usually load up the install software from a Compact Flash card. The problems I've had with CPPM cards is not even seeing the BIOS screen.

Have you seen this?.

http://www.ghtrout.com/files/Resett...fault_to_allow_a_reload_of_older_software.zip

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[bdabson]

Hi,

yep FBUG is still there, the card I'm on is only 5.0W but the prompt is there & FBUG asks for a password.

as for the CPPM not loading up, if you have a spare card try swapping the SODIMM to test the RAM.
This has worked for me in the past.

cheers