How can I setup an extension to recieve faxes accross my pri? I knoe what digits the telco is sending when a call comes in for istance 4050. We use 44242D+ digital sets so the extensions are digital not sure how the switch would handle sending to a fax machine that is analog? thanks in advance.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Faxing over PRI using DID 2
- Thread starter pbhughes
- Start date
-
1
- #2
You'd need to have an 012t/r or 016 t/r card to be able to hook up an analog device (such as a plain phone, a credit card terminal, or a fax). Then you'd just renumber one of those ports (analog) to match the DID digits that are being sent.
- Thread starter
- #3
- Thread starter
- #4
I think on the ETR version of the card, only the last four can be configured as POTS type phones.
According to the manual:
016 ETR: ports 11-16 can be ETR or T/R (ports 1–10 can be ETR only)
The procedure to change a port from ETR to t/r is:
Extensions®More®More®ETR®
Type ext. no.®Enter®Select port type (ETR or Tip
Ring)®Enter®Exit®Exit
According to the manual:
016 ETR: ports 11-16 can be ETR or T/R (ports 1–10 can be ETR only)
The procedure to change a port from ETR to t/r is:
Extensions®More®More®ETR®
Type ext. no.®Enter®Select port type (ETR or Tip
Ring)®Enter®Exit®Exit
-
1
- #6
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
