fax server

[bladeka]

does anyone know a fax server software that can integrate with CCM ???

 

[congogrey]

You mean fax over IP?

I do not know of software that will do it but Brooktrout makes a fax-over-IP card that works with Fenestrae (faxination) and other software. This would integrate with CCM as an H.323. I am not sure that there is any software that work with Skinny.

http://www.brooktrout.com/products/tr1034/

"For every complex problem, there is a solution that is simple, neat and wrong" -- H.L. Mencken

 

[netwalker1]

Hmmm ,,
I think I need a normal FAX Server which will handle all the FAXes and convert them to an email for example ..

Do u know something like this ?

Mohamed Farid
[green]Know Me No Pain , No Me Know Pain !!![/green]
CCNP,CCSP,CCA,MCSE,MCSA

 

[congogrey]

All fax server software does that (esp. Faxination). The question is how do you integrate it with the PSTN. You can either install a T1 card or an IP card and tie them into PBX's or the PSTN directly.

"For every complex problem, there is a solution that is simple, neat and wrong" -- H.L. Mencken

 

[megaco]

Cisco use something called TCL scripting. You install the scripts on the flash card.

Reference them on the gatway and send inbound faxes via dialpeers to the desktop.

Im not a fan of this cause it adds a delay to the inbound call and is designed for using a single number. If you are going to use one number for ip phone and one number for fax then this will be the best option.

Usually configured on 26xx gateway - hope this helps

 

[AdmanOK]

Interstar (

http://www.interstarinc.com)

make a product called Xmedius Fax Server which does completely IP based integration with CallManager, no boards required.