Fax over IP

[backe]

Hi, all
Can anyone tell me how to set fax over ip?

I am using IP Office - SOE v.4.0(10) and S8300/G350 v.5.0.

IP Office side:
on ip trunk I've set:
- GW address: <S8300 addr>
- Compression mode: Automatic Select
- H450: None
- Enable Faststart: Checked
- Out of Band DTMF: Checked
- Allow Direct Media Path: Checked
- Fax Transport Support: Checked

S8300/G350 side:
on IP trunk I've set:
- DTMF over IP: out-of-band
- Direct IP-IP Audio Connections: n
- IP Audio Hairpinning: n
on ip-codecset 1 I've set:
- Audio Codec: G711MU
- Fax: relay

I would like to say that I've tried various combinations and nothing worked!

 

[backe]

I'd like to add that systems are on same subnet, literaly side by side

 

[Bas1234]

Try to set your FAX on 9600 baud, G3 (33,6 or 14,4 baud) just don't well.

___________________________________________
It works! Now if only I could remember what I did...
___________________________________________