Hello,
I'm having one heck of a time getting fax machines to work. What works at one site doesn't seem to work at another. They are all connected to a VG224, through VG Router that uses a SIP Trunk back to the CUCM. The fax goes a out a PRI and the VG224 is MGCP using t.38. Faxes fail to receive. When I call the fax from a regular phone the fax connects but then drops right after connecting. Ideas? Thanks
Router config
voice service voip
ip address trusted list
ipv4 10.123.8.35 255.255.255.255
address-hiding
media statistics
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback pass-through g711ulaw
modem passthrough nse codec g711ulaw redundancy
h323
sip
bind control source-interface GigabitEthernet0/0.10
bind media source-interface GigabitEthernet0/0.10
registrar server expires max 600 min 60
early-offer forced
midcall-signaling passthru
mgcp
mgcp rtp unreachable timeout 1000 action notify
mgcp modem passthrough voip mode nse
mgcp package-capability rtp-package
mgcp package-capability sst-package
mgcp package-capability pre-package
mgcp default-package fxr-package
no mgcp package-capability res-package
no mgcp timer receive-rtcp
mgcp sdp simple
mgcp behavior rsip-range tgcp-only
mgcp behavior comedia-role none
mgcp behavior comedia-check-media-src disable
mgcp behavior comedia-sdp-force disable
!
mgcp profile default
dial-peer voice 100 voip
description dial-peer to SUB_2
preference 2
destination-pattern 123.......
session protocol sipv2
session target ipv4:10.123.8.35
incoming called-number .
voice-class codec 1
dtmf-relay rtp-nte
fax-relay sg3-to-g3
ip qos dscp cs3 signaling
no vad
VG224 Config (MGCP)
voice service voip
fax protocol pass-through g711ulaw
modem passthrough nse codec g711ulaw
ccm-manager redundant-host 10.127.8.37 10.119.192.30
ccm-manager mgcp
no ccm-manager fax protocol cisco
ccm-manager music-on-hold
ccm-manager config server 10.127.8.35
ccm-manager config
!
mgcp
mgcp call-agent 10.127.8.36 2427 service-type mgcp version 0.1
mgcp dtmf-relay voip codec all mode nte-gw
mgcp rtp unreachable timeout 1000 action notify
mgcp modem passthrough voip mode nse
mgcp package-capability rtp-package
mgcp package-capability sst-package
mgcp package-capability fm-package
no mgcp package-capability res-package
no mgcp timer receive-rtcp
mgcp sdp simple
mgcp fax rate 14400
mgcp fax t38 nsf 000000
I'm having one heck of a time getting fax machines to work. What works at one site doesn't seem to work at another. They are all connected to a VG224, through VG Router that uses a SIP Trunk back to the CUCM. The fax goes a out a PRI and the VG224 is MGCP using t.38. Faxes fail to receive. When I call the fax from a regular phone the fax connects but then drops right after connecting. Ideas? Thanks
Router config
voice service voip
ip address trusted list
ipv4 10.123.8.35 255.255.255.255
address-hiding
media statistics
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback pass-through g711ulaw
modem passthrough nse codec g711ulaw redundancy
h323
sip
bind control source-interface GigabitEthernet0/0.10
bind media source-interface GigabitEthernet0/0.10
registrar server expires max 600 min 60
early-offer forced
midcall-signaling passthru
mgcp
mgcp rtp unreachable timeout 1000 action notify
mgcp modem passthrough voip mode nse
mgcp package-capability rtp-package
mgcp package-capability sst-package
mgcp package-capability pre-package
mgcp default-package fxr-package
no mgcp package-capability res-package
no mgcp timer receive-rtcp
mgcp sdp simple
mgcp behavior rsip-range tgcp-only
mgcp behavior comedia-role none
mgcp behavior comedia-check-media-src disable
mgcp behavior comedia-sdp-force disable
!
mgcp profile default
dial-peer voice 100 voip
description dial-peer to SUB_2
preference 2
destination-pattern 123.......
session protocol sipv2
session target ipv4:10.123.8.35
incoming called-number .
voice-class codec 1
dtmf-relay rtp-nte
fax-relay sg3-to-g3
ip qos dscp cs3 signaling
no vad
VG224 Config (MGCP)
voice service voip
fax protocol pass-through g711ulaw
modem passthrough nse codec g711ulaw
ccm-manager redundant-host 10.127.8.37 10.119.192.30
ccm-manager mgcp
no ccm-manager fax protocol cisco
ccm-manager music-on-hold
ccm-manager config server 10.127.8.35
ccm-manager config
!
mgcp
mgcp call-agent 10.127.8.36 2427 service-type mgcp version 0.1
mgcp dtmf-relay voip codec all mode nte-gw
mgcp rtp unreachable timeout 1000 action notify
mgcp modem passthrough voip mode nse
mgcp package-capability rtp-package
mgcp package-capability sst-package
mgcp package-capability fm-package
no mgcp package-capability res-package
no mgcp timer receive-rtcp
mgcp sdp simple
mgcp fax rate 14400
mgcp fax t38 nsf 000000