Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

fax configuration dramas on uc520

Status
Not open for further replies.

rickrude11

IS-IT--Management
Jul 15, 2007
71
NZ
I have a uc520 with 2 BRI interfaces and 4 FXS interfaces. My fax line comes in on the BRIs, and the fax machine is hooked up to fxs port 0/0/0.

when I test the fax, the fax machine picks up, but errors saying it can't detect a fax or unable to negotiate fax protocol.

I need a direction to head. I can find plenty of documentation on using analogue lines, but not for my setup.

thanks.
 
update: I set the compand-type to a-law and cptone to NZ. Getting full pages sometimes, half pages other times.

cheers.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top