Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

FAULTY CLOCK PROCESSOR

Status
Not open for further replies.

batkotivalio

IS-IT--Management
Mar 22, 2011
27
Does anybody have experience with this issue. As a result of this I can't initiate DUMP...

 
sounds like a faulty LPU. Please contact your service provider to get it replaced.

/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!
 
Hi,
Please check the system with
lscnp
lsfti
They should point you to the error, probably lsu board is faulty.
BR,
CAF
 
The FAULT LOCATING DIRECTIONS 8/154 51-CNA 103 251 for error code "101 Faulty clock processor" simply advise to replace the LSU in the affected LIM.
 
correct,

it is LSU not LPU, my bad...

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!
 
Daddy,
Considering the amount and quality of help you provide on this forum I believe that all will excuse you for such a small slip :)
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top