Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Fault in SPS

Status
Not open for further replies.

mabulal

IS-IT--Management
Jan 31, 2006
21
0
0
US
The second SPS does not start. The navi manager shows it as not present. There are no lights on the SPS. I tried powering down and powering up and checked the cables. they seem to be fine. Is there any way to fix this. The second SPS seems to be working fine.

thanks
mabu
 
options:
1. buy another sps
2. try replacing the 4 batteries in the sps
3. run on one sps.
 
The SPS's have some fuses inside. you can check that stuff out. Also there is a POT inside that I had to adjust on one of my SPS's to get the fault light to clear. Basically it adjusts the charging voltage. In this case this probably doesn't have anything to do with what your problem is.
 
I don't suggest altering the settings on the internal electronics unless you positively know what you are doing and what it affects. You risk damaging the batteries or the electronics.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top