I have a MICS 6.0 (another company). I have a RAD on ext. 2263. I have line 150 A/R. The RAD will not answer when called. If I put a set on the port the line rings to the set. I can 9*0 to the RAD fine. I took the RAD back to the shop and put it on the test system (non-pri) and it answers fine. The only setting that I changed was the answer line number. Any ideas.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
FastRad not answering
- Thread starter ddeberry
- Start date
Yes you need the fastrad firmware upgrade to answer target lines on PRI.
Download from Nortel's website.
David Brillert
Download from Nortel's website.
David Brillert
- Status
Similar threads
- Locked
- Question
- Locked
- Question