I have a site running release 7.5 and I am trying in configure/invoke fast station sync which is suppose to let you make changes using cli and these changes are then reflected back into em (just like a tm4 sync)
All the book says is to enable buf stn in ld 117 and then the ip address of the em should be populated in the smp traps. Nothing else. If i put the address in manually it still does not work
Must be missing something any successful users?
regards
john
All the book says is to enable buf stn in ld 117 and then the ip address of the em should be populated in the smp traps. Nothing else. If i put the address in manually it still does not work
Must be missing something any successful users?
regards
john
