Fast busy after one RING

[philcap]

Hi

Where can I adjust for my incoming call to 3075. I defined the 3075 to LD 14 atdn to automatically ring the phone. My problem is after one, it cuts-off and caller to the 3075 got a fast busy tone.

Is there any way I could correc or adjust in the Option 11c.

Below is the translations I made.

Thanks



LD 21
TYPE: rdb
CUST 0
ROUT 10

TYPE RDB
CUST 00
DMOD
ROUT 10
DES
TKTP TIE
ESN NO
CNVT NO
SAT NO
RCLS EXT
DTRK YES
BRIP NO
DGTP DTI
ISDN NO
DSEL VCE
PTYP DTT
AUTO YES
DNIS NO
IANI NO
ICOG IAO
SRCH LIN
TRMB YES
STEP
ACOD 7555 - access code to seize the trunk
TARG 01
CLEN 1
BILN NO
OABS
INST
ANTK
SIGO STD
STYP STDN
TIMR ICF 512
OGF 512
EOD 13952
DSI 34944
NRD 10112
DDL 70
ODT 4096
RGV 640
GRD 896
SFB 3
TFD 0
SST 5 0
NEDC ORG
FEDC ORG
CPDC NO
DLTN NO
HOLD 02 02 40
SEIZ 02 02
SVFL 02 02
DRNG NO
CDR NO
MUS NO
MANO NO
FRL 0 0
FRL 1 0
FRL 2 0
FRL 3 0
FRL 4 0
FRL 5 0
FRL 6 0
FRL 7 0


PAGE 002

OHQ NO
OHQT 00
CBQ NO
AUTH NO
TTBL 0
OHTD NO
PLEV 2
ALRM NO
ART 0
SGRP 0
AACR NO

LD 14 - to define trkmem
LD 20- to print trkmem
REQ: prt
TYPE: tnb
TN 3 1
DATE
PAGE
DES

TN 003 01
TYPE TIE
CUST 0
TRK DTI
PDCA 1
PCML MU
NCOS 0
RTMB 10 1
ATDN 3075 - incoming route of the trunk, it rings the extn 3075
TGAR 1
SIGL EM4
STRI/STRO IMM IMM
SUPN NO
AST NO
IAPG 0
CLS UNR DTN CND ECD WTA LPR APN THFD HKD
P10 VNL MID
TKID
DATE 13 JAN 2005

 

[cpm23]

You may try setting SUPN to yes (LD 14).

 

[johnpoole]

unplug the phone and test the trunk. a bad eam with imm start is tricky to say the least. missed wiring a problem? i've seen lots of those on older style trunks.. that problem is refered to a a call that trips ring. a light ground on the ring side of the rec ckt will cause that. another thing that can cause that is using type a on a cls b e and m... ear and mouth ckts are almost as old as me.. is it 2 wire (2pair) of 4 wire (three pair)

john poole
bellsouth business
columbia,sc