FALSE TRAP GENERATE FROM CISCO 7513 SNMP

[graphco1971]

Hello,

I have a big problem in a WAN infrastructure with ATM protocols.

The proplem is this :

I have an ATM subiterface that fall in a branch (eg: ROME > Napoli ) then I have a right TRAP over NNM that the ATM PVC are fault ... When the ATM come UP I receive a loop of message in NNM that the protocol are still down !!!

This loop has got a frequency of messages any 5 second

This generate a big problem to the network support that receive FALSE ticket.


any help is accepted

ALBERTO
ITALY

 

[vlan52]

Hi Graphco, do you still have this issue?

Which router is the "closest" to your NNM server?
Rome or Napoli?

Which router is sending the protocol DOWN trap when the ATM PVC comes up? Rome or Napoli?

Thanks in advance.

vlan52
The end of wisdom is freedom. The end of culture is perfection. The end of
education is character. The end of knowledge is love.

 

[graphco1971]

Hello

the router that first came down is the Napoli in Brach ( Naples)

So I suppose that the Trap is generated by the Naples site.

After 1 second the protocol cames UP.

But Our NNM continue to generate the ALARM even if the protocol is UP

Sep 11 06:10:49: %CONTROLLER-5-UPDOWN: Controller E1 1/0, changed state to down
Sep 11 06:10:50: %CONTROLLER-5-UPDOWN: Controller E1 1/0, changed state to up
Sep 11 06:10:58: %OSPF-5-ADJCHG: Process 69, Nbr 10.255.0.1 on Serial1/0:1.16 fr
om FULL to DOWN, Neighbor Down: Interface down or detached
Sep 11 06:12:00: %OSPF-5-ADJCHG: Process 69, Nbr 10.255.0.1 on Serial1/0:1.16 fr
om LOADING to FULL, Loading Done


Regards