Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Fail on MX-ONE Repair Server / LIM procedure

Status
Not open for further replies.

edgarquadros

Technical User
Jun 30, 2011
22
BR
I have a MX-ONE 5.0 SP8 system, with 6 LIMs/servers, and the HD of Server 3 "died'.
So, I replace the server and prepared it with new installation of MX-ONE files, to do a Repair Server procedure.
But, when I tried to do it, I'm receiving the following error message from SSH, and the procedure is being interrupted:

Getting LIM data and checking network connectivity
CheckSecurity...
Setting up ssh communication...
Valid keys exists on the Host
SSH communication may take a long time depending on network
Failed to establish SSH with HOST:172.18.2.13

Please manually execute the following command from root to failed LIM IP address as argument
/home/eri_sn_admin/install_sw/sshComm - hosts failedLIM_IPAddress

Please correct the indicated problem manually and then run
'sudo -H /home/eri_sn_admin/install_sw/eri_sn_multi eri_sn_admin repair'

The question is, that I already connected manually using SSH from all running servers to the new server, and from the new server to all running servers, so the SSH connection seems to be fine!

Any idea to solve it?

BR
Edgar

BR,
Edgar
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top