Extreme switch snmpv3

[JoeBlo1]

Not sure this is the right place to post but here goes. I just got a job in a heavy Extreme shop. The old admin is gone and no one knows anything about the network. I download a network discovery tool to help me get some key information. It needs snmp information (version, user, context, auth type and password). I haven't really used snmpv3 but that is what is configured. I see the user name but I am not sure how to find the additional information. Below is what is in the config. I am in way over my head and need to get a handle of this network. Any help would be greatly appreciated.
Thanks!
Joe

sBD-8810.1 # sh configuration snmp
#
# Module snmpMaster configuration.
#
configure snmpv3 add community mystuff name mystuff user v1v2c_ro
configure snmpv3 add community mystufftoo name mystufftoo user v1v2c_rw
configure snmpv3 add target-addr v1v2cNotifyTAddr1 param v1v2cNotifyParam1 ipadd
ress 192.168.4.200 transport-port 10550 from 10.0.0.3 tag-list defaultNotify
configure snmpv3 add target-addr v1v2cNotifyTAddr2 param v1v2cNotifyParam3 ipadd
ress 192.168.4.16 transport-port 10550 from 10.0.0.3 tag-list defaultNotify
configure snmpv3 add target-addr v1v2cNotifyTAddr3 param v1v2cNotifyParam4 ipadd
ress 192.168.0.16 transport-port 10550 from 172.20.1.3 tag-list defaultNotify
configure snmpv3 add target-addr v1v2cNotifyTAddr4 param v1v2cNotifyParam5 ipadd
ress 10.102.0.101 transport-port 10550 from 10.0.0.3 tag-list defaultNotify
configure snmpv3 add target-params v1v2cNotifyParam1 user v1v2cNotifyUser1 mp-mo
del snmpv2c sec-model snmpv2c sec-level noauth
configure snmpv3 add target-params v1v2cNotifyParam2 user v1v2cNotifyUser2 mp-mo
del snmpv2c sec-model snmpv2c sec-level noauth
configure snmpv3 add target-params v1v2cNotifyParam3 user v1v2cNotifyUser3 mp-mo
del snmpv2c sec-model snmpv2c sec-level noauth
configure snmpv3 add target-params v1v2cNotifyParam4 user v1v2cNotifyUser4 mp-mo
del snmpv2c sec-model snmpv2c sec-level noauth
configure snmpv3 add target-params v1v2cNotifyParam5 user v1v2cNotifyUser5 mp-mo
del snmpv2c sec-model snmpv2c sec-level noauthhop.

 

[tommyboy23]

Your not running the right command

Try this command
show snmp vr vr-default

You can always delete the SNMP settings and setup them up how you want.