computercustodian
Technical User
I am trying to recover the passwork on a Summit48. I have seen a couple threads on this already.
I do not get the options to delete or erase.
BootROM->
s: Load from Serial Port
p: Boot PCMCIA card
1: Select primary
2: Select secondary
f: Boot on board flash
b: Change baud rate
h: Help
g: boot image
BootROM->
Do I need to upgrade the code?
Version 4.1.9 (Build 7) By Release_Master on Wed 07/14/1999 1:51p
System Serial Number: 9930M02165
Memory Size: 33554432 (32MB)
MAC Address: 00:e0:2b:6a:1f:00
can new code be downloaded or is this a fee for service with Extreme?
I do not get the options to delete or erase.
BootROM->
s: Load from Serial Port
p: Boot PCMCIA card
1: Select primary
2: Select secondary
f: Boot on board flash
b: Change baud rate
h: Help
g: boot image
BootROM->
Do I need to upgrade the code?
Version 4.1.9 (Build 7) By Release_Master on Wed 07/14/1999 1:51p
System Serial Number: 9930M02165
Memory Size: 33554432 (32MB)
MAC Address: 00:e0:2b:6a:1f:00
can new code be downloaded or is this a fee for service with Extreme?