Extreme Networks Summit 48 Console ????

[misterBin]

Hello i was wondering what cable should be used to console into the above switch ?? Will a Cisco console cable work ??

If not does any body have a how to or wiring diagram on how i can make one...

Also is are these the correct settings ??

baud rate 9600
data bits 8
stop bit 1
parity none
flow control xon/xoff


Thanks in Advanced

 

[joshopkins]

the settings for the console are correct.

Wiring Diagram

DCD (data carrier detect) 1 In
RXD (receive data) 2 In
TXD (transmit data) 3 Out
DTR (data terminal ready) 4 Out
GND (ground) 5 -
DSR (data set ready) 6 In
RTS (request to send) 7 Out
CTS (clear to send) 8 In

 

[misterBin]

Thanks a bunch made the cable today and it works like a charm