Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Extracting data from Meridian?

Status
Not open for further replies.

tomkuk

Technical User
Aug 15, 2007
85
US
Hi, I was wondering if anyone knew of a way to extract data from the meridian so it is suitable for a .csv or similar?
I am looking to get all the extensions listed with perhaps the names also against that?

Thanks.
Tom.
 
go to Gene's site and download the conversion utility by DB....( it's on the right hand side of the screen )

capture the required data from the switch and it will arrange it all in nice pretty rows..

 
Yes, it will work with either a DNB or TNB etc. I've done a document that explains how to use it. I've also recently added in a worksheet to do CLID entries.

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

If it's working, then leave it alone!.
 
How do you "capture" the data to begin with please? I am strictly Avaya and these Nortel commands are alien to me. I am dialed in and getting a prompt >
What do I type to get a list of the stations and their programming please?
 
>LD 20 (enter)
REQ: PRT (enter)
TYPE: TNB (enter)
TN: (just hit return til it starts printing and capture the data)


 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top