EXTRA DIGITS ON CDR OUTPUT

[toaks]

I am monotoring the output of cdr on a OPT 81c. What I am seeing is the number dialed and other digits that are dialed after the number,such as passwords, menu selections and other digits that are dialed. This causes problems for the CDR box that does the billing.
I have changed vatious prompts in the cdr portion of the route as well as the ODT timer in 16 with no luck.
Has anyone found a solution for this problem?

I can use some help...

 

[Reusser]

In the route data block

LD 16
Req: CHG
Type: RDB
CDR: Yes
OPD: no <-- if yes will send additional digits

Do this for each route having problem with