EXTINGUISH The LIM 1

[RJSIERRA55]

HELLO ,,,,
I HAVE 5 LIM And I MUST EXTINGUISH The LIM4, THAT I MUST CONSIDER TO MAKE THIS WORK THANKS.

 

[jazaya]

I take it that you mean distinguish!!!!
There are several ways to do this.
1-Check the labling on cables,but if the LIMS are not labled,I presume that the cables aren't either.
2-Obtain a CNBIP from the system and visually check your hardware.
Hope it helps

Experience it, there is no substitute.
RemoveThisJazayeri@kiasagroup.com

 

[Hitechbuzz]

Hi RJSIERRA55
I must "Extinguish " do you mean "Remove from service" and then have a 4 Lim set up. Also what BC version are you running.
Cheers

 

[SYAR2003]

Extinguish the Lim


Run PcRegen
Use the files to remove ALL data in the Lim
Extensions / Trunks / groups /operators
Remove traffic measurments for objects that
has the lim involved or trunks/operators/groups/etc.
Remove LIM data:
ROELE:LIM= ;
LCLDE:LIM= ;
CPDLE:LIM= ;
Be certain no GH / ACD / CB /GP groups is stored
in the lim.
Look at all the group prints.
Kill the groups that is stored in the lim ,
and reprogram them with another lim no.
Make CNBOE on all boards except GJUL4 board in x-0-00.
Make a system dump.
Make a safety backup.
Check lim for COMMON functions.
CNPIP:LIM= ,CFUNC=YES;
If common units exists and is duplicated in other lim
End the programs in the Lim. LAPUR
Run SFCEI.
If common units exists and is NOT duplicated in other lim
Dump the program with DUPUI.
Load the program as a duplicated .
Run SFCEI
Run DUSYI to update the new loaded program with data
Remove program from the lim thats to be removed.
Make a new check CNPIP:LIM= ,CFUNC=YES;
Make another DUSYI.
Block the lim BLLTI:LIM= ;
End the Lim with CNLIE:LIM = ;
Make a DUSYI;

All this is explained in the documentation under
.. / Basic exchange / Operation and Maintenance, SES /
Configuration, CN / Hardware removal /erasure of Lim.

I suggest you study the procedure there also.
In case i forgot something...


SYAR

 

[alapi]

Hi,

I'm very interesting in that.

When you say: "Remove program from the lim thats to be removed." ...

Do you refer all program in LIM?

Do I remove all program that 'CNPUP:LIM=X;' lists?


Thanks.

 

[alapi]

Hi,

Another question.

In the step: "Load the program as a duplicated."
Would I do this?

PUPUI:LIM=LIMOLD,UNIT=U1;
LAPUL:LIM=LIMNEW,UNIT=U1;
LADCI:LIMS=LIMOLD,LIMR=LIMNEW,UNIT=U1;

Do I need "LADCI" ?
Do I need "SFPUI:LIM=LIMNEW,UNIT=U1;" ?

Please, Help me!