External Ringer Problem

[StinkTech]

I've got 6 Digial phones (4x2616 and 2xM3904) and one analog (1x500) with a MCR DN 2000 setup as a ring group. The analog line is connected to a ringer. The problem I'm having is the ringer will work 10-20 times then stay busy and no longer work. The digital phones continue to ring. If I disable / enable the port it will work again, for awhile. I've changed ringers from a ringer to a bell and back. How do I make this work consistantly? Is there a certain ringer / bell / interface that needs to be purchased?

The Analog card is a NT8D09AK RLSE 08

Analog 500 TN

DES 2000
TN 009 0 00 01
TYPE 500
CDEN 4D
CUST 0
WRLS NO
DN 2000 0 MARP
CPND
NAME Ringer
XPLN 27
DISPLAY_FMT FIRST,LAST
AST NO
IAPG 0
HUNT
TGAR 1
LDN NO
NCOS 0
SGRP 0
RNPG 0
XLST
SCI 0
CLS CTD DTN FBD XFD WTA THFD FND HTD ONS
LPR XRD CWD SWD MWD RMMD SMWD LPD XHD SLKD CCSD LND TVD
CFTD SFD MRD C6D CNID CLBD AUTU
ICDD CDMD LLCN EHTD MCTD
GPUD DPUD CFXD ARHD OVDD AGTD CLTD LDTD ASCD
MBXD CPFA CPTA DDGA NAMA
MCRA
EXR0 SHL ABDD CFHD DNDY DNO3
USRD BNRD OCBD RTDD RBDD RBHD FAXD CNUD CNAD PGND FTTC
PLEV 02
FCAR NO
AACS NO
MLWU_LANG 0
DATE 6 SEP 2007


Thank you in Advance
StinkTech

 

[PERRYPJ]

Have you tried to disconnecting the ringer to see if it becomes idle

OLD ROLMEN WORKING ON NORTELS AND AVAYA

 

[StinkTech]

No...What would that tell me?

 

[GHTROUT]

That will tell you if the ringer is holding the line up. I would try a TN on another analog line card.

Find more at GHTROUT.com

 

[StinkTech]

FYI: Disconnected the ringer and the line stayed busy...
Moved to another card. Working fine for the last couple hours.

Thanks...