External paging

[marco2006]

Hello,

I have to install a external paging system on Nortel ICS 4.0 and was wondering if the amp needed was a specific one, or if any regular amp would do the trick, if this is not the case does anyone know of a low cost amp (It is for a Church so there really is no budget). Furthermore I would also like to know how and where to connect it on the distribution block.

Thanks.

 

[eddiephones]

On the ICS-2.0 system the connections for Ext Page are the Violet/Slate pr. There is a relay (com&make) on the Violet/brown pair for Ext Page systems also...I think the same connections are on the 4.0... For a small building a 15-40 watt regular PA amplifier would be ok.(Bogen etc) You can find amps under Musical instruments,power amps on E-Bay

 

[marco2006]

I was wondering if anyone could tell me how to connect the wires to the dist. block. I have on the block four slots * C T
R i was wondering how and which wires to connect to RCA Jacks in order to then plug them into the amp.

 

[jerryreeve]

try these:
faq799-2063
faq799-1799
faq799-1782


----------------------------
JerryReeve
Communication Systems Int'l
com-sys.com