External Paging BP location 2

[Gregresh]

I am trying to fing the binding post location on a Norstar switch for the external paging (Bogen)

 

[hawks]

Which system are you connecting to?

 

[Gregresh]

It is a Nortel Norstar phone system. we are trying to find which pin/pair on the KSU to connect the paging systen to.

 

[PERRYPJ]

what type of norstar

OLD ROLMEN WORKING ON NORTELS

 

[MarvO1]

Gregresh, there are several different Norstar flavors, so you need to know which one you have.
For the older 6x16 and 3x8 KSU's, use the VIOLET/ORANGE Pair.

For the 8x24 KSU, use the VIOLET/ORANGE pair of the second AMP. cable (Line ports and Aux. Equip)

For the CICS KSC, use the VIOLET/SLATE pair on the left side Amp. cable.

For the MICS, use the BLUE/SLATE pair on the middle Amp. cable.

MarvO said it

 

[galfaro]

I think you mean black/slate on the MICS Marvo.
Gabriel

 

[MarvO1]

galfaro,
Ah yup, how embarrassing. color blinded momentarially.
BLACK/SLATE it is. Blue/slate doesn't exist.

MarvO said it

 

[wrichey]

while we are on the topic does the mics have multiple pairs for paging or a N.O contact someplace?? I cant seem to find any other than noted in the thread (samsung spoiled me) any help would be great.

 

[bkrike]

Nortel has 1 output pair for page and a relay if needed. I dont know what you mean by "N.O contact”. As with any system, you could also use the CO ports.

 

[wrichey]

bkrike thanks for the input is there any way to turn on or off the relay if needed? and N.O Normaly Open contact or a make/break contact is what I was getting at. Oh and the co port thing works great but the customer does not like to press more than one button to page or send out a warble tone. The latter is what I need the N.O relay for. Anyhoo thanks again for the help and if I can help you some time you know were to find me

 

[telemarv]

The relay is controlled via AUX RINGER its not controlled by paging.