Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

External page zones through the page port of the BCM

Status
Not open for further replies.

gsxr1000

Vendor
Aug 4, 2003
33
US
I have a valcom 3 zone page controller and i want to hook it up through the page port of the BCM.
The page controller gives a tone when off hook and then you can enter the desired zone. I works fine with my butt set, but when i connect to the page port of the bcm nothing happens. It doesn't take the zone digit.
 
You have to connect your Valcom on an Analog Trunk port.

You can't dial any digits by the paging port from any Nortel system.

Good Luck!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top