External MOH

[netwalker1]

Dear All :
I have a MOH Server - not Cisco - and I want to integrate it with my Callmanager Server ...
[red]

How can I do this ?[/red]


Although I have a Cisco MOH Unity , but I want to get red of it because it's flood my Network with the Multicast traffic !!!!

[red]Do u have a solution to stop the flooding Multicast traffic ?[/red]

Mohamed Farid
[green]Know Me No Pain , No Me Know Pain !!![/green]

 

[BuckWeet]

Why not implement multicast right, then it won't flood your network?

 

[netwalker1]

How ?

Mohamed Farid
[green]Know Me No Pain , No Me Know Pain !!![/green]

 

[ciscofreak1241]

Even better, how do you have your multicast configured on your network today?

Show us configs and explain the network setup you have? That would be a better approach to help you with your Multicast configuration.

cf

 

[netwalker1]

I just checked the Multicast option on the Call Manager for the MOH ..

I don't have any multicast services except the MOH ..

Mohamed Farid
[green]Know Me No Pain , No Me Know Pain !!![/green]

 

[ciscofreak1241]

I mean't on the network. Do you have CGMP or IGMP snooping enabled on your access switches. Do you have IP PIM configured? Do you have Anycast or MSDP configured? Misconfiguration of IP Multicast can cause flooding throughout your network. I have seen in some cases multicast excessive flooding caused from the access switches not configured (or not configured correctly) for either CGMP or IGMP snooping. You need to configure that, so your access switches will know how to handle multicast-based traffic than just flooding list broadcast traffic does. Configuring IP Multicast is very straight-forward for the most part ... if it is configured correctly.

cf