External input to Miran

[IWIF]

Sorry for another Miran question, I searched the forum and did not find the answer I needed. I have the Miran III card and I connected a CD player to the proper mini jack on back of card. When testing the MOH it is still playing channel 0 default MOH music. Do I have to change config's so it plays the analog input. I thought plugging in a CD player would over ride, the manual is not very clear on this.

Thanks everyone,

Rob
Maryland State Gov.

 

[bigindian65]

look at the channel assignments on the card, probably shows the on board mus file assigned. Don't know the assigment off hand, but might be a choice on the menu.

Mato' Was'aka

 

[Utreg]

Settings for CD / MP3 player on Analog input A0;

Day: *
Channel: 0
Filename: ANALOG0
Time: 00:00
Abstract:

Channel 0 should be active

 

[IWIF]

A bit of a newbie on this. What screens are these settings under? And will the default MOH remain for future use?

Thanks,

RD

 

[Utreg]

Should be under: Assignments
Where that menu is depends on how you access the Miran (via http or PC COM-port)

After setting up perform a backup to c: drive to hold setting.