webbster61
MIS
I have a SATA Maxtor DimandMax 3.5' 120GB hard drive. I was wondering if anybody knew of a good kit or enclosure that would allow me to convert it to external use. Looking for SATA(internal) to USB(external).
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
External HDD Enclosure Issues
- Thread starter webbster61
- Start date
- Status
webbster61,
There are many no frills enclosures. Frills would be like the Maxtor 'One Touch' enclosure.
You can look at these links Just insure that you are looking at one for a SATA drive as I took it from your post. With no frills and is you are using XP there is not a requirement for access software. Fairly simple to setup an access. Other Winxx could require sw for access maybe.
Enclosures
NewEgg
rvnguy
"I know everything..I just can't remember it all
There are many no frills enclosures. Frills would be like the Maxtor 'One Touch' enclosure.
You can look at these links Just insure that you are looking at one for a SATA drive as I took it from your post. With no frills and is you are using XP there is not a requirement for access software. Fairly simple to setup an access. Other Winxx could require sw for access maybe.
Enclosures
NewEgg
rvnguy
"I know everything..I just can't remember it all
- Status