External CLI numbers and names over TIE links

[Terrytele]

Hello,

I have configured a PRI on a Small Meridian Succession system to link to a Cisco Call Manager. We get internal names and numbers passed between the two but when a DDI calls is passed (via a DSC) we get "unknown number"

here is what I have for the DCH

ADAN DCH 12
CTYP MSDL
CARD 04
PORT 1
DES CallMan
USR PRI
DCHL 4
OTBF 32
PARM RS422 DTE
DRAT 64KC
CLOK EXT
IFC ISGF
PINX_CUST 0
ISDN_MCNT 300
CLID OPT0
CO_TYPE STD
SIDE NET
CNEG 1
RLS ID **
QCHID YES
RCAP COLP NDI CCBI CCNI PRI DV1I CTI
PR_TRIGS DIV 2 3
CNG 2 3
PR_RTN NO
MBGA NO
OVLR YES
DIDD 0
OVLS YES
OVLT 0
T310 120
T200 3
T203 10
N200 3
N201 260
K 7

Any ideas/pointers appreciated,

Thanks

 

[PERRYPJ]

DID YOU TURN ON OUTGOING MESSAGING TO SEE IF WAS BEING SENT

OLD ROLMEN WORKING ON NORTELS

 

[Terrytele]

where and how would I do this? I can't find any reference to this in the Features and Services manual.

 

[PERRYPJ]

LD 96
ENL MSGO X
DIS MSGO X
X IS YOUR DCH

OLD ROLMEN WORKING ON NORTELS

 

[Terrytele]

Yes, tried that, but there is not sign of external numbers, internal are OK.

 

[Terrytele]

Currently looking at MQC_Feat hoping it might come up with the goods... does anybody know if this option is workable on a PRI with ISGF? Or does it just apply to MCDN?