Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Extension issue

Status
Not open for further replies.
Oct 31, 2017
21
AE
We have an issue with extension number. When we transfer any call to it we get the busy beep
 
post a TNB of the phone.
Also go to ld 80 and trace the phone. See if there is anything activated on the phone which could cause this.

John Anaya
Amdocs Inc.
ACSS/ACIS - CS1000 Rls 7.5/Call Pilot 5
ACSS/ACIS - SME - IP Office 8.0
APSS/APDS - Avaya UC Services

Public Profile
 
do you have 1 of the following
1. DND/ Busy key active
2. stat the TN of the set when idle
3. call forward active to an unavailable destination

Remember if it doesn't work hit it harder

Scott UK
 
Ringer fluid is probably low causing the busy. You can stat the fluid level in ld 32

I'm sorry

Merry Christmas everyone
 
either ringer fluid or the polarity is reversed on the flux capacitor, try re-starting the flugle binder & you'll be sorted

:)



Remember if it doesn't work hit it harder

Scott UK
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top