Does anyone know the command line (i.e from a P.C ) to initiate functions on an extension . I cannot get to the particular extension or get access to the switch board , but i can log onto the pabx. Is there a command I can do from my PC to send a #21# to the phone? or any other phone functions? e.g. *21#, MD110 BC12SP3
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
EXTENSION FUNCTIONS
- Thread starter IODDP
- Start date
summerdike
Instructor
There are some things u can do, depends also on the type of extension, license , tehe exact thing you want etc.
For example u can do: PELPI followed by PEALC (Personal Nr. active list change), but there you need license of course.
For generic type of extension (DECT, IP, Remote ext. etc.) has possibility to execute GEPEI (Generic ext. procedure executio initiate: Gepei:dir=,proc=
.The parameter proc includes *21 or #21.
Maybe you should be more specific about the problem.
______________________________
"Reload and Restart Requested
System Initiated"
For example u can do: PELPI followed by PEALC (Personal Nr. active list change), but there you need license of course.
For generic type of extension (DECT, IP, Remote ext. etc.) has possibility to execute GEPEI (Generic ext. procedure executio initiate: Gepei:dir=,proc=
.The parameter proc includes *21 or #21.Maybe you should be more specific about the problem.
______________________________
"Reload and Restart Requested
System Initiated"
- Status