mytelecoms
Vendor
This may be helpful, or it maybe carrier specific but here goes.
Just had one of my engineers onsite setting up Extn Billing on an IP403.
It would not work on firmware V3 with their carrier (although manually dialing would work fine).
I told our guy to roll the firmware back to 2.1 (35) and test it, and it worked.
Ww were using:
?
1666DE.
Dial
We also did it using 9N and 1666DEN.
Extnesion billing would not work on any release of V3 (although we did not try 58 or 5803). It works perfectly on on 2.1 (35), using either of the shortcodes.
I have reported this to Avaya as a possible bug, but if any of you experience something similar, just bear this in mind.
Hope it helps.
Chris
mytelecoms.co.uk
Just had one of my engineers onsite setting up Extn Billing on an IP403.
It would not work on firmware V3 with their carrier (although manually dialing would work fine).
I told our guy to roll the firmware back to 2.1 (35) and test it, and it worked.
Ww were using:
?
1666DE.
Dial
We also did it using 9N and 1666DEN.
Extnesion billing would not work on any release of V3 (although we did not try 58 or 5803). It works perfectly on on 2.1 (35), using either of the shortcodes.
I have reported this to Avaya as a possible bug, but if any of you experience something similar, just bear this in mind.
Hope it helps.
Chris
mytelecoms.co.uk