Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Expansion Module

Status
Not open for further replies.

specialistacs

Technical User
Jun 29, 2007
80
I have an IP406 V2 installed wicth 6 ex^pansion module.

I want to disinstall the second module ( ATM16 analog trunk)

what is the differents steps to do .

thanks
 
Unplug it from the back and then delete from the config. I would also check all you outgoing call routes to see there are any routes that use these trunks before taking the unit out.

Jamie Green

ACA:Implement - IP Office
ACS:Implement - IP Office


Football is not a matter of life and death-It is far more important!!!!
 
there is no problem when unplagged module2 and the other module still in the some place ( order) ?
 
Not at all. I would just get rid of the programmin gfor neatness.

Jamie Green

ACA:Implement - IP Office
ACS:Implement - IP Office


Football is not a matter of life and death-It is far more important!!!!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top