I have never seen this before. A little background. We recently upgraded to CM 6.3. We have installed Avaya 9408 sets. Our first issue with these was fluctuating audio which was corrected with the latest firmware download to the phones. Now I have one phone that I have added 3 expansion modules to it. About every hour or so the expansion modules will duplicate one another. The 3rd module will look like the first or the 2nd and 3rd module would look alike. I set up one on my desk and I actually saw the 3rd module all of a sudden change and now it would look like the 2nd module. I looked in the administration and it still had the original programming. But the 2nd and 3rd module on the actual phone are the same. Even if I go ahead and hit one of the SD buttons it dials the same number. Weird. Any suggestions??
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Expansion Module Issues
- Thread starter prflash
- Start date
montyzummer
IS-IT--Management
This could be corruption remove all translations related t the problem station and BM and re-create , if you still have the issue i would suggest a bug and Raise a SR
APSS (SME)
ACSS (SME)
ACIS (UC)
APSS (SME)
ACSS (SME)
ACIS (UC)
- Status
Similar threads
- Locked
- Question