Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
EXN has a FTC
- Thread starter marcosa
- Start date
IR=1111,EQU=001-1-11-11; but, go out the message " EXN has a FTC" How do fix it?EXN HAS A FTC The extension to be moved has a PFC (Power Failure Connection).
This phone 1111 is not connected direct to ELU board equ=1-1-11-1, but via FTU board.
Use command
PFCOP:LIM=..;
PFCOE:EQUE=…. (value from printout PFCOP)
Now You can change equ for ext 11111
If you want reinitiate power failure function
PFCOI:EQUE=….,EQUT=….; (EQUE- is a new position of extension 1111)
This phone 1111 is not connected direct to ELU board equ=1-1-11-1, but via FTU board.
Use command
PFCOP:LIM=..;
PFCOE:EQUE=…. (value from printout PFCOP)
Now You can change equ for ext 11111
If you want reinitiate power failure function
PFCOI:EQUE=….,EQUT=….; (EQUE- is a new position of extension 1111)
- Status
Similar threads
- Locked
- Question
- Locked
- Question