Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

EXL lenth problem 1

Status
Not open for further replies.

Monrovia

Technical User
Mar 1, 2007
292
IN
Hi guys,
I am facing a problem with the number length setting.

I have set the length MIN=4 & MAX=4. But when the extensions dial the remote exchange extension numbers it starts dialing & sending signal immediately in 2 digits.

[TT]<RODDP:DEST=2&3;
EXTERNAL DESTINATION ROUTE DATA
DEST DRN ROU CHO CUST ADC TRC SRT NUMACK PRE
2 2 260610001000125000600111001 0 2 0 2161
3 2 260610001000125000600111001 0 2 0 3161

END
<NADAP;
NUMBER ANALYSIS DATA
TYPE OF SERIES NUMBER SERIES
EXTENSION NUMBER SERIES 8100 - 8198
8200 - 8399
EXTERNAL DESTINATION CODE 00
0118
014
018
04 - 08
10
110
119
1212
2 - 7

OWN EXCHANGE NUMBER SERIES
DIRECT INWARD SERVICE ACCESS
TYPE OF SERVICE CODE SERVICE CODE
EXTERNAL NUMBER LENGTH DATA
EXTERNAL NUMBER NUMBER LENGTH
00 8 - 17
01 8 - 20
05 12 - 14
06 12 - 20
07 10 - 15
08 10 - 20
13 7 - 7
14 7 - 7
15 7 - 7
16 7 - 7
17 7 - 7
19 7 - 7
2 4 - 4
3 4 - 4
PROCEED TO SEND SIGNAL DATA

END [/TT]

But, if I don't set the number length in NANLS, it takes 10-15sec to start dialing.

Kindly assist

B.R.
Monro
 
When MIN and MAX are the same, ADC dig 1=1

When MIN is less than MAX, ADC dig 1=2

You have MAX=4 & MIN=4, so try changing ADC dig 1=1

best parnum
 
Thanks parnum for the trick.

I changed the adc dig 1 = 0 (immediate seizure) and made change in the nadap list. Since there is PRE which is dialing 161 in the starting of the number, i added that into the nanls.

[tt]<roddp:dest=2&3;
EXTERNAL DESTINATION ROUTE DATA
DEST DRN ROU CHO CUST ADC TRC SRT NUMACK PRE
2 2 060610001000125000600111001 0 2 0 2161
3 2 060610001000125000600111001 0 2 0 3161

END
<nadap;
NUMBER ANALYSIS DATA
TYPE OF SERIES NUMBER SERIES
EXTENSION NUMBER SERIES 8100 - 8198
8200 - 8399
EXTERNAL DESTINATION CODE 00
0118
014
018
04 - 08
10
110
119
1212
122 - 180
183 - 199
2 - 7

OWN EXCHANGE NUMBER SERIES
DIRECT INWARD SERVICE ACCESS
TYPE OF SERVICE CODE SERVICE CODE
EXTERNAL NUMBER LENGTH DATA
EXTERNAL NUMBER NUMBER LENGTH
00 8 - 17
01 8 - 20
05 12 - 14
06 12 - 20
07 10 - 15
08 10 - 20
1212 9 - 9
13 7 - 7
14 7 - 7
15 7 - 7
16 4 - 7
17 7 - 7
18 7 - 7
19 7 - 7 [/tt]

Thanks a lot
B.R
Monro
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top