Hi,
this is my first post. hope someone can help.
We have a client with the following setup
4 Exchange 5.5 servers installed within a single Exchange organisation.
The four servers are installed within one exchange site although two are physically in remote offices and connectied via an ISDN router.
The problem i have is the constant synchronisation between the 4 servers seems to constantly keep the ISDN lines "up".
Is there anyway around this within this setup, or should it have been done differently, and if so is it an easy change!
Hope someone can point me in the right direction.
Regards
Paul Stringfellow
this is my first post. hope someone can help.
We have a client with the following setup
4 Exchange 5.5 servers installed within a single Exchange organisation.
The four servers are installed within one exchange site although two are physically in remote offices and connectied via an ISDN router.
The problem i have is the constant synchronisation between the 4 servers seems to constantly keep the ISDN lines "up".
Is there anyway around this within this setup, or should it have been done differently, and if so is it an easy change!
Hope someone can point me in the right direction.
Regards
Paul Stringfellow
