Hello all,
So here's my situation: I have two master servers running in our environment. That aside, I recently moved an exchange job from on master server to the other. The first backup job ran just fine; faster and with no problems. The last two nights, however, I've noticed that my exchange backup exited with a status 1. There are four data streams I've setup for this job. Two of the four jobs exit with status 1.
So on the master server and client I'm running Windows 2k sp4 NBU 5.1 MP6.
On the server that I moved the job to, I used the media server to run the job the last two nights, tonight I'm going to run it from the master server and see if that makes any impact.
Any suggestions are appreciated and welcome.
So here's my situation: I have two master servers running in our environment. That aside, I recently moved an exchange job from on master server to the other. The first backup job ran just fine; faster and with no problems. The last two nights, however, I've noticed that my exchange backup exited with a status 1. There are four data streams I've setup for this job. Two of the four jobs exit with status 1.
So on the master server and client I'm running Windows 2k sp4 NBU 5.1 MP6.
On the server that I moved the job to, I used the media server to run the job the last two nights, tonight I'm going to run it from the master server and see if that makes any impact.
Any suggestions are appreciated and welcome.